U-Boot for Amlogic P201 (S905)

P201 is a reference board manufactured by Amlogic with the following specifications:

  • Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz

  • ARM Mali 450 GPU

  • 2GB DDR3 SDRAM

  • 10/100 Ethernet

  • HDMI 2.0 4K/60Hz display

  • 2x USB 2.0 Host

  • eMMC, microSD

  • Infrared receiver

  • SDIO WiFi Module

  • CVBS + Stereo Audio Jack

Schematics are available from Amlogic on demand.

U-Boot Compilation

$ export CROSS_COMPILE=aarch64-none-elf-
$ make p201_defconfig
$ make

U-Boot Signing with Pre-Built FIP repo

$ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
$ cd amlogic-boot-fip
$ mkdir my-output-dir
$ ./build-fip.sh p201 /path/to/u-boot/u-boot.bin my-output-dir

U-Boot Manual Signing

Amlogic does not provide sources for the firmware and tools needed to create a bootloader image but sources have been shared by Linux development contractor, Baylibre:

$ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
$ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
$ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
$ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
$ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
$ git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
$ cd amlogic-u-boot
$ make gxb_p201_v1_defconfig
$ make
$ export FIPDIR=$PWD/fip

Go back to mainline U-Boot source tree then :

$ mkdir fip

$ cp $FIPDIR/gxb/bl2.bin fip/
$ cp $FIPDIR/gxb/acs.bin fip/
$ cp $FIPDIR/gxb/bl21.bin fip/
$ cp $FIPDIR/gxb/bl30.bin fip/
$ cp $FIPDIR/gxb/bl301.bin fip/
$ cp $FIPDIR/gxb/bl31.img fip/
$ cp u-boot.bin fip/bl33.bin
$ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel
$ chmod +x fip/bl1.bin.hardkernel
$ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum
$ chmod +x fip/aml_chksum

$ $FIPDIR/blx_fix.sh \
          fip/bl30.bin \
          fip/zero_tmp \
          fip/bl30_zero.bin \
          fip/bl301.bin \
          fip/bl301_zero.bin \
          fip/bl30_new.bin \
          bl30

$ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0

$ $FIPDIR/blx_fix.sh \
          fip/bl2_acs.bin \
          fip/zero_tmp \
          fip/bl2_zero.bin \
          fip/bl21.bin \
          fip/bl21_zero.bin \
          fip/bl2_new.bin \
          bl2

$ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
                     --bl31 fip/bl31.img \
                     --bl33 fip/bl33.bin \
                     fip/fip.bin

$ cat fip/bl2_new.bin fip/fip.bin >fip/boot_new.bin

$ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
                              --input fip/boot_new.bin \
                              --output fip/u-boot.bin

Then write U-Boot to SD or eMMC with:

$ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
$ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
$ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
$ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
$ ./aml_chksum fip/u-boot.bin.gxbb
$ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
$ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440