qconfig - Querying CONFIG options
It is not possible to see all the CONFIG options used by a board without building its .config file. This tool allows this to be done efficiently for all boards, or a subset, writing the results to a unified database file.
This database can be queried, to find boards which used a certain combination of options, to aid in discovering Kconfig options which imply others.
The tool also permits syncing of defconfigs, which corrects the ordering and drops options which are implied by others.
Finally, it allows scanning the source code to look for inconsistencies in the use of Kconfig options.
Installation
You may need to install ‘python3-asteval’ for the ‘asteval’ module.
How does it work?
When building a database (-b), this tool runs configuration and builds include/autoconf.mk for every defconfig. The config options defined in Kconfig appear in the .config file (unless they are hidden because of unmet dependency.) On the other hand, the config options defined by board headers are seen in include/autoconf.mk.
When resyncing defconfigs (-s) the .config is synced by “make savedefconfig” and the defconfig is updated with it.
For faster processing, this tool is multi-threaded. It creates separate build directories where the out-of-tree build is run. The temporary build directories are automatically created and deleted as needed. The number of threads are chosen based on the number of the CPU cores of your system although you can change it via -j (–jobs) option.
Note that *.config fragments are not supported.
Toolchains
Appropriate toolchains are necessary to generate include/autoconf.mk for all the architectures supported by U-Boot. Most of them are available at the kernel.org site. This tool uses the same tools as Buildman build tool, so you can use buildman –fetch-arch to fetch toolchains.
Examples
To sync only X86 defconfigs:
./tools/qconfig.py -s -d <(grep -l X86 configs/*)
or:
grep -l X86 configs/* | ./tools/qconfig.py -s -d -
To process CONFIG_CMD_FPGAD only for a subset of configs based on path match:
ls configs/{hrcon*,iocon*,strider*} | \
./tools/qconfig.py -C CONFIG_CMD_FPGAD -d -
Finding boards with particular CONFIG combinations
You can use qconfig.py to figure out which boards have a CONFIG enabled, or which do not. To use it, first build a database:
./tools/qconfig.py -b
Then you can run queries using the -f flag followed by a list of CONFIG terms. Each term is CONFIG name, with or without a tilde (~) prefix. The tool searches for boards which match the CONFIG name, or do not match if tilde is used. For example, to find boards which enabled CONFIG_SCSI but not CONFIG_BLK:
tools/qconfig.py -f SCSI ~BLK
3 matches
pg_wcom_seli8_defconfig highbank_defconfig pg_wcom_expu1_defconfig
It is also possible to search for particular values. For example, this finds all boards with an empty string for CONFIG_DEFAULT_FDT_FILE:
./tools/qconfig.py -f DEFAULT_FDT_FILE=\"\"
1092 matches
...
This finds boards which have a value for SYS_MAXARGS other than 64:
./tools/qconfig.py -f ~SYS_MAXARGS=64
cfg CONFIG_SYS_MAXARGS
281 matches
...
Finding implied CONFIGs
Some CONFIG options can be implied by others and this can help to reduce the size of the defconfig files. For example, CONFIG_X86 implies CONFIG_CMD_IRQ, so we can put ‘imply CMD_IRQ’ under ‘config X86’ and all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to each of the x86 defconfig files.
This tool can help find such configs. To use it, first build a database:
./tools/qconfig.py -b
Then try to query it:
./tools/qconfig.py -i CONFIG_I8042_KEYB
CONFIG_I8042_KEYB found in 33/5155 defconfigs
28 : CONFIG_X86
28 : CONFIG_SA_PCIEX_LENGTH
28 : CONFIG_HPET_ADDRESS
28 : CONFIG_MAX_PIRQ_LINKS
28 : CONFIG_I8254_TIMER
28 : CONFIG_I8259_PIC
28 : CONFIG_RAMBASE
28 : CONFIG_IRQ_SLOT_COUNT
28 : CONFIG_PCIE_ECAM_SIZE
28 : CONFIG_APIC
...
This shows a list of config options which might imply CONFIG_I8042_KEYB along with how many defconfigs they cover. From this you can see that CONFIG_X86 generally implies CONFIG_I8042_KEYB but not always (28 out of 35). Therefore, instead of adding CONFIG_I8042_KEYB to the defconfig of every x86 board, you could add a single imply line to the Kconfig file:
config X86
bool "x86 architecture"
...
imply CMD_EEPROM
That will cover 28 defconfigs and you can perhaps find another condition that indicates that CONFIG_I8042_KEYB is not needed for the remaining 5 boards. Many of the options listed are not suitable as they are not related. E.g. it would be odd for CONFIG_RAMBASE to imply CONFIG_I8042_KEYB.
Using this search you can reduce the size of qconfig patches.
You can automatically add ‘imply’ statements in the Kconfig with the -a option:
./tools/qconfig.py -s -i CONFIG_SCSI \
-a CONFIG_ARCH_LS1021A,CONFIG_ARCH_LS1043A
This will add ‘imply SCSI’ to the two CONFIG options mentioned, assuming that the database indicates that they do actually imply CONFIG_SCSI and do not already have an ‘imply SCSI’.
The output shows where the imply is added:
18 : CONFIG_ARCH_LS1021A arch/arm/cpu/armv7/ls102xa/Kconfig:1
13 : CONFIG_ARCH_LS1043A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:11
12 : CONFIG_ARCH_LS1046A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:31
The first number is the number of boards which can avoid having a special CONFIG_SCSI option in their defconfig file if this ‘imply’ is added. The location at the right is the Kconfig file and line number where the config appears. For example, adding ‘imply CONFIG_SCSI’ to the ‘config ARCH_LS1021A’ in arch/arm/cpu/armv7/ls102xa/Kconfig at line 1 will help 18 boards to reduce the size of their defconfig files.
If you want to add an ‘imply’ to every imply config in the list, you can use:
./tools/qconfig.py -s -i CONFIG_SCSI -a all
To control which ones are displayed, use -I <list> where list is a list of options (use ‘-I help’ to see possible options and their meaning).
To skip showing you options that already have an ‘imply’ attached, use -A.
When you have finished adding ‘imply’ options you can regenerate the defconfig files for affected boards with something like:
git show --stat | ./tools/qconfig.py -s -d -
This will regenerate only those defconfigs changed in the current commit. If you start with (say) 100 defconfigs being changed in the commit, and add a few ‘imply’ options as above, then regenerate, hopefully you can reduce the number of defconfigs changed in the commit.
Available options
- --nocolour
Disables colouring of output. This is normally used when writing to a terminal.
- -C, --commit
Create a git commit with the changes when the operation is complete. A standard commit message is used which may need to be edited.
- -d, --defconfigs
Specify a file containing a list of defconfigs to move. The defconfig files can be given with shell-style wildcards. Use ‘-’ to read from stdin.
- -f, --find
Find boards with a given config combination
- -n, --dry-run
Perform a trial run that does not make any changes. It is useful to see what is going to happen before one actually runs it.
- -e, --exit-on-error
Exit immediately if Make exits with a non-zero status while processing a defconfig file.
- -s, --force-sync
Do “make savedefconfig” forcibly for all the defconfig files. If not specified, “make savedefconfig” only occurs for cases where at least one CONFIG was moved.
- -S, --spl
Look for moved config options in spl/include/autoconf.mk instead of include/autoconf.mk. This is useful for moving options for SPL build because SPL related options (mostly prefixed with CONFIG_SPL_) are sometimes blocked by CONFIG_XPL_BUILD ifdef conditionals.
- -j, --jobs
Specify the number of threads to run simultaneously. If not specified, the number of threads is the same as the number of CPU cores.
- -r, --git-ref
Specify the git ref to clone for building the autoconf.mk. If unspecified use the CWD. This is useful for when changes to the Kconfig affect the default values and you want to capture the state of the defconfig from before that change was in effect. If in doubt, specify a ref pre-Kconfig changes (use HEAD if Kconfig changes are not committed). Worst case it will take a bit longer to run, but will always do the right thing.
- -v, --verbose
Show any build errors as boards are built
To see the complete list of supported options, run:
tools/qconfig.py -h