imx93w_evk

U-Boot for the NXP i.MX93W EVK board.

Quick Start

  • Get and Build the ARM Trusted firmware

  • Get the DDR firmware

  • Get ahab-container.img

  • Build U-Boot

  • Boot

Get and Build the ARM Trusted firmware

Note: srctree is U-Boot source directory Get ATF from: https://github.com/nxp-imx/imx-atf/ branch: lf_v2.14

$ git clone -b lf_v2.14 https://github.com/nxp-imx/imx-atf.git
$ cd imx-atf
$ export CROSS_COMPILE=aarch64-poky-linux-
$ unset LDFLAGS
$ unset AS
$ make PLAT=imx93 bl31
$ cp build/imx93/release/bl31.bin $(srctree)

Get the DDR firmware

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.32-1991416.bin
$ chmod +x firmware-imx-8.32-1991416.bin
$ ./firmware-imx-8.32-1991416.bin
$ cp firmware-imx-8.32-1991416/firmware/ddr/synopsys/lpddr4*v202201.bin $(srctree)

Get ahab-container.img

$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-2.0.6-c0b284c.bin
$ chmod +x firmware-ele-imx-2.0.6-c0b284c.bin
$ ./firmware-ele-imx-2.0.6-c0b284c.bin
$ cp firmware-ele-imx-2.0.6-c0b284c/mx93a1-ahab-container.img $(srctree)

Build U-Boot

$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx93w_evk_defconfig or imx93w_evk_inline_ecc_defconfig
$ make

Burn the flash.bin to MicroSD card offset 32KB:

$ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc

Boot

Set Boot switch to SD boot.